Hydraulic Installation Kits
|
- Dual Pump Configuration
- 10,000 psi and 40,000 psi Pumps & Gauges
- Skid Mounted Light Weight Frame (45 lbs)
- Two Interchangeable 10 Ft. Flexible Hoses
- ISO Grade 32 Hydraulic Oil
- Pressure Tested To Full Capability
- Single Pump Configuration
- Base Mounted 21,750 psi Pump & Gauge
- Supplied with 10 ft. Flexible Hose
- 60,000 PSI Configuration
- Skid Mounted 60,000 psi Pump & Gauge
- Supplied with 10 Ft. Flexible Hose.
- Flexible Hose
- Eliminates Hard Couple Tubing
- Plastic Shipping & Storage Container
Whenever there's a need to install a hydraulic hub or thrust disk look to Riverhawk to supply the answer. We've developed a hydraulic installation kit designed to meet your needs. Our kit has two pumps and their associated gauges mounted on a welded tubular steel sled with all the necessary fittings and flexible hoses needed for hub installation.
|
 |
Our hoses have swivel fittings at each end with a Derlin inner liner, six layers of wound steel pressure support and a Nylon outer cover. They can be readily flexed to a 10 inch radius for storage. They are both rated for the higher pressure, thus are safely interchangeable. All of the interconnecting fittings use the 60 degree angle cone connection which is the 'de facto' standard for high pressure equipment. These fittings are easier to connect than pipe threads and are much more leak resistant and galling free other connection methods.
|
|
|
