Manual Downloads


Below are our Riverhawk Instruction Manuals and Reference Videos. If you’d like to learn about field service and training opportunities, click here.

Riverhawk Instruction Manual and Video List
Service Bulletins
SB NumberDescription
SB-08001Service Bulletin for Riverhawk Tensioners’ Service Life
General Instruction
Manual NumberDescription
IM-130Damaged Stud Removal
IM-157Windage/Balance Plugs
IM-220Cleaning Procedure of Conical Threads
IM-228Quick Reference Checklist – Hydraulic Tensioners
IM-293Hydraulic Pump Kits (MP-0130, AP-0532, AP-6048)
Riverhawk Tooling Installation Manuals
Manual NumberDescription
IM-118Riverhawk Hydraulic Hub Installation/Removal
IM-262Hydraulic Tensioner HT-5351
Power Generation Installation Manuals
Manual NumberDescription
IM-1006B Gas Turbine to Gearbox and Generator
IM-1016FA Gas Turbine to Gearbox and Generator
IM-1107EA Gas Turbine to Load Coupling and Generator
IM-1149FA Gas Turbine to Load Coupling and Generator (Annulus Groove Flange)
IM-1169E Turbine to Elin 9A3 Generator
IM-1179E Turbine or Load Coupling to Elin 9A4/5, Brush or Alstrom Generator
IM-1257FA/7FB Gas Turbine to Load Coupling and 7FH2 Generator
IM-1399H Gas Turbine to Load Coupling and Generator
IM-1506C and Steam Turbine to 6A8 Generator
IM-1529FB/9FA Gas Turbine to Load Coupling and Generator
IM-1867H to Load Coupling
IM-1999FA Gas Turbine to Load Coupling and Generator (Counterbored Flange)
IM-2517FA.05 Safety Interlock Tensioner – Load Coupling and 7FH2B Generator (w/ Turbine End Nut Spacers)
IM-2557FB Safety Interlock Tensioner -Turbine to Load Coupling and Generator (Syngas)
IM-2567EA Safety Interlock Tensioner -Gas Turbine to Load Coupling and Generator
IM-2577FA/7FB Safety Interlock Tensioner -Gas Turbine and 7FH2 Generator
IM-260A17 Safety Interlock Tensioner -Steam Turbine to Load Coupling and 450H Generator
IM-2669FB.05 Safety Interlock Tensioner -Gas Turbine to Load Coupling and W28 Generator
IM-2699FA Turbine to Load Coupling and Hitachi Generator
IM-2789B to 9E Safety Interlock Tensioner – 9E Gas Turbine to 9A5 Generator
IM-3047FA.05 Tuning Plugs and Caps
IM-309GT-6030 Stud Installation Gauge
IM-324D14 Safety Interlock Tensioner -Steam Turbine HPSS to Gen and LP to IP
IM-325D14 Safety Interlock Tensioner – Steam Turbine  IP to HP
IM-3277FA.05 Safety Interlock Tensioner -to Load Coupling and 7FH2B Generator (Standard Flange)
IM-3286B Safety Interlock Tensioner – Gearbox to 6A6 or 5A4 Generator (HT-6331)
IM-3426B, Gearbox to 6A6 or 5A4 Generator (HT-1466 with upgrade kit GT-6393)
Johnson Controls Coupling Manuals
Manual NumberDescription
IM-232JCI Part Number 029-25627-000; Riverhawk Part Number HC-4291
IM-240JCI Part Number 029-25871-000; Riverhawk Part Number HC-4904
IM-245JCI Part Number 029-25911-000; Riverhawk Part Number HC-4932
IM-300JCI Part Number 029-26510-000; Riverhawk Part Number HC-5871
IM-301JCI Part Number 029-26518-000; Riverhawk Part Number HC-5981
IM-322JCI Part Number 029-26794-000; Riverhawk Part Number HC-6181
IM-244JCI Part Number 029-25935-000; Riverhawk Part Number HC-4831
IM-249JCI Part Number 029-26023-000; Riverhawk Part Number HC-5102
IM-287JCI Part Number 029-26364-000; Riverhawk Part Number HC-5834
IM-306JCI Part Number 029-26531-000; Riverhawk Part Number HC-6017
IM-317JCI Part Number 029-26565-000; Riverhawk Part Number HC-6077
IM-318JCI Part Number 029-26575-000; Riverhawk Part Number HC-6104
Reference Videos
Video File NumberDescription
VF-100D14 Steam Turbine  IP-HP Flange, Overview of HT-5298 (supplement to IM-325)
VF-101Cleaning Procedure of the Conical Threads on Riverhawk Studs (supplement to IM-220)
VF-1029B to 9E Conversion Project, 2-3/4” Stud Tensioner (supplement to IM-278)

To learn about field service and training opportunities, click here.


Copyright © 2014 . All rights reserved. Powered by Wordpress